Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

Test and Tag to AS/NZS 3760 in Drawings The Same Order on Every Job

Equipment classes, the visual inspection, plug pins, earth continuity, insulation resistance, polarity, RCD trip times, tags and the register. Every topic has its own page: the drawing first, then what you need to remember. 66 illustrated pages.

GET THE 66 ILLUSTRATED PAGES

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEvery inspection and test drawn, with the explanation beside it
66 illustrated pages8 parts, from what test and tag really is to the van checklist
Up-to-date sourcesAS/NZS 3760:2022, AS/NZS 3012 and the model WHS Regulations
PDF by emailFormat

Look Inside the Book

Each page has one big drawing and a box with the readings, limits and steps you need to know:

Construction 3 months · workshops 6 months · hostile 12 months · office up to 5 years
Construction 3 months · workshops 6 months · hostile 12 months · office up to 5 years
Class III: circle the plug pack, that's the mains item
Class III: circle the plug pack, that's the mains item
Plug pins: four faults you can see without a tester
Plug pins: four faults you can see without a tester
Earth continuity: earth pin to exposed metal, Class I items and cords only
Earth continuity: earth pin to exposed metal, Class I items and cords only
Push-button test: mechanism works, trip time still unmeasured
Push-button test: mechanism works, trip time still unmeasured
Failed item: out of service, durable warning tag, tell the person responsible
Failed item: out of service, durable warning tag, tell the person responsible
Classes, test order, limits, failed items and tag details: five cards, answers on the back.
Classes, test order, limits, failed items and tag details: five cards, answers on the back.
Tester, leads, tags, ties, labels, register pages, quarantine bags and adaptors: tick and go.
Tester, leads, tags, ties, labels, register pages, quarantine bags and adaptors: tick and go.

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 8 parts and 62 topics.

You Did the Course. Nobody Drew You the Plug.

You're in a client's office with a trolley of kettles, chargers and power boards. You pick up the first plug and you're not sure what you're meant to be looking for on the pins.

The course manual covers it in a paragraph about damage, discolouration and deterioration. Words don't show you what a scorched pin looks like when it's in your hand and the client is watching.

Plug pins: four faults you can see without a tester

In the book, plug pins get one page: a good plug drawn next to a scorched one, with the four faults you can see without a tester marked right on the drawing.

The rest of the job works the same way. Cord anchorage, the flexible sheath, taped home repairs, earth continuity and RCD trip times each have their own page.

So you look, you compare and you decide. Pass or fail, without digging through the manual on site.

COMPARE FOR YOURSELF

The Same Topic, Two Ways to Study It

THIS
  • The manual: line after line of text
  • Equipment classes explained only in words
  • You get to site still unsure
Equipment of this type relies on more than its basic insulation to protect the person using it. Its exposed metal parts are bonded to the earth conductor of the supply lead, so that if the insulation breaks down, fault current has a path to earth instead of through the user. To confirm that this protection is intact, the resistance of the earth path is measured between the earth pin of the plug and the exposed metal of the appliance, with the cord flexed along its length, and the reading is then compared with the limit that applies to that length and type of lead.
FOR THIS
  • Class I equipment in one drawing
  • The 1 Ω limit in a box
  • You see it and you get it
Class III: circle the plug pack, that's the mains item
CONTENTS

Take a Look at the 8 Parts and 62 Topics

The job and the rules, the equipment, the visual inspection, getting ready, the tests in order, deciding and tagging, the odd items and a final review: 66 pages, all illustrated

IThe job and the rules · pp. 5-11
  1. What test and tag really is
  2. Who has the duty to test
  3. Queensland is different
  4. Who counts as a competent person
  5. What's in scope and what isn't
  6. New equipment going into service
  7. Retest intervals depend on the environment
IIKnow the equipment · pp. 12-18
  1. Class I: earthed equipment
  2. Class II: double insulated
  3. Class III and SELV items
  4. Extension cords and cord sets
  5. Power boards and surge protection
  6. Portable RCDs and RCD power boards
  7. Appliance connectors and IEC leads
IIIThe visual inspection · pp. 19-27
  1. Inspect in one direction: plug to appliance
  2. Plug pins
  3. The plug body
  4. Cord anchorage at the plug and the appliance
  5. The flexible cord sheath
  6. Joints, tape and home repairs
  7. Enclosure, guards and covers
  8. Controls, vents and the rating plate
  9. Spotting a hostile environment
IVBefore you test · pp. 28-32
  1. Your portable appliance tester
  2. Check your leads, probe and test socket
  3. Plan the site before item one
  4. Asset ID first
  5. Working safely while you test
VThe tests, in order · pp. 33-47
  1. Earth continuity: what it proves
  2. Earth continuity: reading the result
  3. Flex the cord while you test
  4. Long extension leads and the earth reading
  5. Insulation resistance: how it works
  6. Switch it on before the insulation test
  7. Insulation resistance: Class I
  8. Insulation resistance: Class II
  9. The 250 V option for surge-protected items
  10. Leakage current as the alternative
  11. Polarity on cords and cord sets
  12. Continuity of every conductor
  13. RCD push-button test
  14. RCD trip time: 30 mA devices
  15. RCD trip time: 10 mA devices
VIDecide, tag and record · pp. 48-55
  1. Pass or fail: one fault is enough
  2. What to do with a failed item
  3. Repair, replace or dispose
  4. What goes on the tag
  5. Choosing the right tag
  6. Colour-coded tags
  7. The test register
  8. Failed item log and keeping records
VIIItems that don't fit the routine · pp. 56-60
  1. Heating appliances and high leakage
  2. Power tools in workshops
  3. Hire equipment
  4. IT gear, UPS units and filters
  5. When the client asks you a question
VIIIReview and the van checklist · pp. 61-66
  1. The whole sequence on one page
  2. Every reading on one page
  3. The most frequent mistakes
  4. What courses ask about most
  5. Van checklist
  6. Quick glossary

One Page, One Topic, All Clear

Think of it this way:

You're on a workshop floor with a bench grinder in front of you and the client asking if it's good to go. You need the earth reading, and you need to know what it means.

You open the earth continuity page and the test is drawn: plug in the tester, probe on the metal case, the cord flexed along its length, the 1 Ω limit in a box.

Push-button test: mechanism works, trip time still unmeasured

Same with insulation resistance, polarity on extension leads, RCD trip times, failed items and colour-coded tags: each one on its own page.

Test and Tag Illustrated is 8 parts and 62 topics, all drawn, ending with the whole sequence, every reading and a van checklist, each on a single page.

What you see drawn, you don't have to memorize.

What's Inside Test and Tag Illustrated:

Ipp. 5-11

The job and the rules

What test and tag really is, who has the duty to test, how Queensland differs, who counts as competent, what's in scope, new equipment and retest intervals by environment.

IIpp. 12-18

Know the equipment

Class I, Class II and Class III items, extension cords, power boards, portable RCDs and IEC leads, so you know what's on the bench before you test it.

IIIpp. 19-27

The visual inspection

The visual inspection from plug to appliance: pins, plug body, cord anchorage, sheath, taped repairs, enclosure, vents, the rating plate and hostile environments.

IVpp. 28-32

Before you test

Your tester, checking leads and the test socket, planning the site, asset IDs first and working safely while you test.

Vpp. 33-47

The tests, in order

Earth continuity, flexing the cord, long leads, insulation resistance for Class I and II, the 250 V option, leakage current, polarity, conductor continuity and RCD tests.

VIpp. 48-55

Decide, tag and record

Pass or fail, what to do with a failed item, repair or dispose, what goes on the tag, colour-coded tags, the register and the failed item log.

VIIpp. 56-60

Items that don't fit the routine

Heating appliances, workshop power tools, hire equipment, IT gear and UPS units, and how to answer when the client asks a question.

VIIIpp. 61-66

Review and the van checklist

The whole sequence and every reading on one page each, the most frequent mistakes, what courses ask about most, the van checklist and a quick glossary.

At the end of the book: The whole sequence and every reading on one page, the most frequent mistakes and a van checklist.

Plus: 2 Free Books

Test and Tag Practice: Exam-Style Questions and Readings

BONUS 1: «Test and Tag Practice: Exam-Style Questions and Readings»

Value on its own: US$ 17.90

Practise reading results in ohms, megohms and milliseconds and making the pass-or-fail call before you do it on a client's site.

Test and Tag Mistakes: Before and After

BONUS 2: «Test and Tag Mistakes: Before and After»

Value on its own: US$ 14.90

See the most common mistakes in inspecting, testing and tagging, each drawn wrong and then right, so you catch them before the client does.

Test and Tag Illustrated with 2 Free Books

  • Test and Tag Illustrated: 66 illustrated pagesUS$ 63
  • BONUS 1: Test and Tag Practice: Exam-Style Questions and ReadingsUS$ 17.90
  • BONUS 2: Test and Tag Mistakes: Before and AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT TEST AND TAG ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Test and Tag Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You've just done the course

You've just done the course

Every step you rushed through on the course is drawn in the order you'll use it. You go over it at home, one page at a time.

Your first job is next week

Your first job is next week

The whole sequence and every reading are on single printable pages. You walk on site knowing what comes next.

You already test and tag

You already test and tag

The odd items, the failed item steps and the tag and register pages are there to check fast. Print it and keep it in the van.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT TEST AND TAG ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Test and Tag Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've already done a test and tag course?

Yes. It doesn't repeat the course: it puts every inspection and test in the order you use on site, one drawing per page. If you're a licensed electrician adding test and tag, it's a fast way to see the routine without rereading the standard.

Where does the content come from?

It's checked against AS/NZS 3760:2022, AS/NZS 3012 for construction sites, the model WHS Regulations and Queensland's Electrical Safety Regulation 2013. The test sequence and readings come from AS/NZS 3760, used in every state. Queensland gets its own page because its rules differ. In other states, the book flags where your state rules apply, so always check your regulator's current requirements. Everything is in our own words and drawings, without reproducing the text or tables of the standard.

Is it official material?

No. It's an illustrated study book. It isn't issued, approved or endorsed by Standards Australia, Safe Work Australia or any regulator.

Does it replace the course or my training?

No. It doesn't come with a certificate or a statement of attainment, it doesn't make you a competent person, and it doesn't replace a competency course, supervised practice or your state's licensing requirements. It helps you review and keep the steps at hand on site.

Are the practice questions the ones from the course assessment?

No. The questions and readings are written for this book to help you practise. They aren't official questions from any course or assessment.

When and how does it arrive?

The book and the 2 bonus books arrive as PDFs by email, at the address you enter at checkout.

Do I have to pay every month?

No. It's a one-off payment. There's no subscription.

Can I have it on paper?

Yes. The PDFs are made to print, so you can print the whole book or just the pages you want in your kit.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading the manual with nothing sticking.

Plug pins, earth readings and RCD trip times: you see them drawn, and that's it.

You get to site knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT TEST AND TAG ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.